Til Ball Attachment System
Product details & FAQ
The ball attachment system for Til implant-retained overdentures: ball abutments (Ø3.6 mm) in six collar heights, with the metal housing and silicone caps in three retention strengths.
Key features
- Ball abutments TPBA1 to TPBA6, Ø3.6 mm
- Metal housing BAMH
- Silicone caps: clear (standard), pink (soft), yellow (strong)
Sizes and references
Select item above. Each combination has its own reference code (SKU), listed below.
| Reference (SKU) | Item |
|---|---|
| TPBA1 | Ball Abutment 1 mm |
| TPBA2 | Ball Abutment 2 mm |
| TPBA3 | Ball Abutment 3 mm |
| TPBA4 | Ball Abutment 4 mm |
| TPBA5 | Ball Abutment 5 mm |
| TPBA6 | Ball Abutment 6 mm |
| BAMH | Metal Housing |
| BACAP | Silicone Cap – Clear (Standard) |
| BACAPP | Silicone Cap – Pink (Soft) |
| BACAPY | Silicone Cap – Yellow (Strong) |
How to choose
Select the ball abutment collar height to match the gingival thickness, then choose a cap by the retention you need. Replace caps regularly as they wear.
Compatibility
Ball abutments are for the Til implant. The metal housing and silicone caps are shared MSDI attachment parts and are listed here for convenience.
Regulatory
MSDI products meet the highest standards set by the FDA, CE MDR, ISO 13485 and other regulatory bodies. Some products may not have regulatory clearance for sale in specific territories. See the instructions for use (IFU).
Frequently asked questions
Which implant does this fit?
The Til internal-hex implant (Ø3.0 mm platform) only. Components from other MSDI systems are not interchangeable.
Where can I find instructions for use?
The IFU for all MSDI products is available at eifu.msdi-dental.com. Always read it before use.
Which cap should I choose?
Pink is soft, clear is standard and yellow is strong retention.
Complete your case
Components that are usually ordered with this item.
